Discovery

Integrator

The Discovery Tab of the Configuration Page allows an Integrator-Partner to discover Controllers, Hubs, Wireless Locks, and add Devices to a Cloud Node.

Red-series Controllers using Wireless (WiMAC) or Ethernet communications, Red Hubs, Red Wireless Locks, and Legacy PDK Controllers using Wireless communication use the Discovery process to add any associated Devices to that Cloud Node. 

The Cloud Node will automatically begin detecting. Both newly detected Controllers and Controllers with previously configured Devices will be displayed, with the names of the configured Devices listed below their MAC addresses/IP addresses. Red Wireless Locks and Hubs will not be discoverable once added to the system. 

NOTE: At least one Red Hub must be added to the Cloud Node before a Wireless Lock can be discovered.

After discovering the available Controllers or Wireless Locks, select Add Device or Add Hub, and follow the steps detailed in the article about adding Devices.

Important Note: The contents will refresh to a blank state each time you navigate to the Discovery tab.

Discovery will pause after a period of inactivity. Selecting Run Discovery will refresh the available Controllers, Hubs, and Locks.