Red 8

Eight Door Controller - PN: R8

PDK’s Red 8 controller includes built-in Ethernet connectivity and self-discovery, simplifying ip configuration and functionality. Communication plug-and-play connection options are added by purchasing a Red WiMAC wireless or PoE++ Module Kit. The Red 8 is equipped with OSDP functionality, an on-board power supply, and a fully-supervised power circuit that monitors input, output, battery voltage, and overall controller health.

Optional Module Add-On Kits

WiMAC^TMwireless Module PN: RMW
PoE Module PN: RMPOE

Red 8 Features

Advanced Security - ProdataKey Red products lead the industry in secure communication protocols. This includes OSDP, mobile, and encrypted credential communication.

Power Monitoring - Equipped with an on-board power supply, and a fully-supervised power circuit that monitors input, output, battery voltage, and overall controller health.

Plug n' Play Connectivity - All PDK Red devices were designed to be plug n' play. That means they're easy to install right out of the box. It's simple to add any device, no matter how large the job is.

Self Discoverable - The Red 8 will be automatically discovered by the Cloud Node when an Ethernet cable is
connected; it is not necessary to enter the IP address; the device is self-discoverable.

Module Kits - Additional WiMAC and PoE++ plug-and-play connection kits can be added by purchasing the respective wireless or PoE kit. Plug the module into the PDK Red 8 board, and it's ready to go.

System Scalability - Whether you need two door or a thousand, the PDK Red 8 Controller gives you the flexibility
to add more doors anytime, anywhere, on any device.

Specifications

Connections

Removable Screw-down Terminals
Built-in Power Supply
Industrial-grade 2A Form-C Relay (8)
Reader (8)
Input A (8) and Input B (8)

Communication Options

Ethernet
WiMAC Wireless (2.4 GHz / 802.15.4)
PoE++
Encryption: AES 128bit
Wireless Range: 1 Mile LoS, 450ft indoor average

Environmental

Temperature: -4º ~ +140º F / -20º ~ +60º C
Humidity: 0 - 95% relative humidity non condensing

Enclosure

Dimensions (W x H x D) 14.25” x 14.25” x 4.0625”
Metal lockable security can (indoor use only)

Compliance

Conforms to UL 294

Requirements

Power

12 VDC Input
Powers readers and other door hardware directly from the bus
10A concurrent max on the bus
Operating Amperage: 35mA (Continuous amperage draw when idle)

* Battery not included but a backup battery must be installed to comply with UL 294.

NOTE: for proper operation, use the provided power supply. When not using the provided power supply, PDK recommends using a regulated power supply that outputs no greater than 24 volts as measured with a multimeter.

Included Power Supply

Altronix eFlow 102NB
120VAC 60 Hz input
12VDC output

Manufacturer's Limited Warranty

One to five-year warranty against defects in materials and workmanship. For full details, visit prodatakey.com/warranty.

For questions about the Red 8 controller, contact PDK Tech Support.

Red 8 Data Sheet