Elevator Rules

To create an Elevator Rule, tap/click the yellow plus (+) icon next to the Rules section.

Then tap/click on the Elevator tab.

Schedule

Tap/click this field to select between Always, Recurring, or Single Date

Below is an explanation of each Schedule Type and how to configure it

Always - The rule will always be processed.

Recurring - The rule will be processed only during the selected time frame each week.

Start Time - Tap/click the digits to enter the specified time (in 24H format) the rule will begin or tap/click the calendar icon to use a visual clock to set the specified time the rule will begin.
Stop Time - Tap/click the digits to enter the specified time (in 24H format) the rule will end or tap/click the calendar icon to use a visual clock to set the specified time the rule will end.
Days - Select the days of the week the rule will be processed. By default, Monday-Friday are selected.

Single Date - The rule will only be processed for the specified time frame on a single day.

Start Time - Tap/click the digits to enter the specified time (in 24H format) the rule will begin or tap/click the calendar icon to use a visual clock to set the specified time the rule will begin.
Stop Time - Tap/click the digits to enter the specified time (in 24H format) the rule will end or tap/click the calendar icon to use a visual clock to set the specified time the rule will end.
Day - Tap/click the field to enter the day or the calendar icon to use an on-screen calendar to select the day when the rule will be processed 

Authentication Policy

The Authentication Policy option allows Elevator rules to require different credentials or credential combinations to allow access.

Card Only - This option requires the Person to scan a Card credential.
PIN Only - This option requires the Person to enter a PIN on the reader's keypad.
Card or PIN - This option requires the Person to scan a Card credential or enter a PIN on the reader's keypad.
Card then PIN - This option requires the Person to scan a Card credential and enter a PIN on the reader's keypad.

Important Notes:

1. ProdataKey app credentials (Bluetooth and Mobile) are treated as Card Credentials. 
2. If an Authentication Policy is set at the Device level for the Elevator reader, this may conflict with the selected Authentication Policy and cause Credentials to not function properly.

Floor Groups

The Floor Group option allows for the selection of configured Elevator Floor Groups available on the Customer Account or Partition for inclusion in a rule.

Tap/click the yellow plus (+) icon next to Floor Groups and then tap/click to place checkmarks next to the device(s), then tap/click Select. 

After configuring the Elevator rule, tap/click the Save button in the upper-right corner of the window to save the rule.