Connections - Adding a Gateway Connection

A Gateway Connection is used to extend the WiMAC wireless signal to areas that can not reach the Cloud Node or other Controllers but need to be on the same WiMac network as the Cloud Node or if you need to add WiMAC capability to a Cloud Node without wireless connectivity, such as a server Cloud Node or Ethernet-only version of Red Cloud Node. 

Name -  Enter a name for the connection here. This can be anything you like, from an internal code to a descriptive name for the Gateway (IE location where the controller is located).

Port - This will normally be 2101 unless changed in the web browser interface for the Gateway.

IP Address - Enter the IP address for the Gateway. This needs to be set to 'Static' in the web interface for the Gateway.

When finished adding the new Gateway Connection, click the Add button.